Owner`s manual

• To reduce residue
buildup, remove the
Natural Cool Moisture™
filter before filling the
humidifier. Run it under
cold water. Turn the filter
upside down before repo-
sitioning it in the reservoir
base.
To help extend the life of
your filter, repeat this step
every time you fill your
humidifier.
• Fill the reservoir base
with COOL tap water up
to the FULL WATER LEVEL
mark. DO NOT OVERFILL.
• Reposition the upper
motor housing on the
water-filled reservoir base,
being careful not to drop
the cord into the water.
NOTE: DO NOT POUR
WATER INTO THE GRILL
ON THE TOP OF THE
UPPER MOTOR HOUSING.
DOING SO MAY DAMAGE
THE HUMIDIFIER OR
CAUSE PERSONAL
INJURY.
• With the power switch
in the OFF position, plug
the filled humidifier into a
polarized 120V outlet.
DO NOT FORCE THE
POLARIZED PLUG INTO
THE OUTLET;
it will only
fit one way.
CAUTION: DO NOT PLUG
IN THE HUMIDIFIER WITH
WET HANDS AS AN ELEC-
TRIC SHOCK COULD
OCCUR.
MODEL DH-821:
• The humidifier will
begin to operate and will
run continuously as soon
as it is plugged in.
• If you notice condensa-
tion forming on walls or
windows, turn the humidi-
fier off by unplugging it.
MODEL DH-822:
• Set the power switch to
ON; the humidifier will
run continuously.
•
If you notice condensa-
tion forming on walls or
windows, turn the power
switch to OFF.
MODEL DH-823:
• Set the power switch to
the desired position:
– HIGH for fast humidify-
ing.
– NORMAL for quieter
operation.
• The humidifier will run
continuously at this select-
ed speed.
• Lower the setting from
HIGH to NORMAL if you
notice condensation form-
ing on walls or windows.
FILLING CONT.
Fig. 1
➞
➞
OPERATION