Full Product Manual

Solar LED Spotlight
Model # SS3C-F100L-BK-1
Step 2 (FIG.2)
Assemble the spotlight (A) to ground spike (B). Then, push the light into the ground. :
DO NOT use a hammer. For ground with hard soil,to prevent breaking the ground spike,
use a trowel to loose soil first.
B
A
Note: A minimum capacity of 850mAh is
required. Reassemble the . CONTAINS LITHIUM PHOSPHATE
BATTERIES. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT INGEST. Do
correctly with regard to polarity (+ and -).
the maximum amount of full and direct sunlight for 10–12 hours a day. If the fixture does not
receive enough sunlight during any given day (e.g. due to cloudy or overcast weather
the solar panel clean is equally important to ensure the maximum charging performance.
2. The fixture is installed too close to other light sources (e.g. streetlights, porch lights, other
fixture or eliminate other light sources.
receive full sunlight for at least 10-12 hours.
© 2017 Product is distributed by: Jiawei Technology (USA) Ltd. • 2305 Lincoln Avenue • Hayward, CA 94545
For assistance: 855-826-7488 • Monday–Friday, 9:30 am–6:30 pm EST • [e-mail]
Before First Use
performance, it is best to install the fixture in full and direct sunlight and charge for at least 10–12 hours a day. Allow the fixture
Step 1 (FIG.1)