User Guide

6
Lamps
There are 2 candelabra lamps each with an E-12 (small) socket base rating voltage 120vac, rating power
40watts. These lamps are located inside the bottom of the insert. Unfasten the 2 screws on the 2 sides of
the bottom panel, take out the bottom panel. Refer to Figure 5.
Figure 5, bottom panel screw locations
Locate the 2 bulbs in the bottom of the unit. Examine the bulbs to determine which bulb requires
replacement. Remove the holding spring on the old bulb and replace the bulb with a new one. Reinstall
the holding spring after replacement. Refer to Figure 6.
Figure 6, lamp locations
2 Fixing Screw
Bottom panel
Candelabra bulbs, 120vac, 40watts,
E-12 small socket. Holding spring
located around each bulb.