Installation Guide

Shut off water supply. Remove old
faucet.
Insert undercover plate into faucet
housing (make sure the stamped
words on the plate are facing down)
and place it on sink.
Connect to water supplies
(hook-ups not provided).
Flush system by turning on
hot and cold water lines
to full open for one minute
each. Check for leaks.
From under sink, secure faucet to
sink with locknuts by hand only.
Step 1 Step 2
Step 4
Step 3
Installation Instructions
Maintenance/Cleaning Instructions
Cleaning Tips: The nish on your faucet is designed to retain its beautiful sheen for years. To
maintain the original look of the nish, a little care and caution should be used. We recommend
the use of mild soap and water to clean the faucet. THE USE OF ABRASIVE CLEANERS MAY
SCRATCH THE FINISH.