Manualshelf

Instructions / Assembly

ManualsBrandsDuPont ManualsKitchenUniversal Undersink Water Filtration System
12345678910
Universal Drinking Water Series
4
V4.2
STEP
3
Connect Water Lines
FOR RIGID TUBING:
1 Disconnect the top of the cold water plumbing line from the faucet shank and gently bend the plumbing line for access to the
lower line fitting.
2 Screw the Kitchen Faucet Adapter E onto the lower end of the faucet shank.
3 Screw the E onto the upper end of the cold water line.
FOR FLEXIBLE TUBING:
1 Disconnect the top of the cold water plumbing line from the faucet shank.
2 Screw the E onto the lower end of faucet shank.
3 Screw the E onto the upper end of the cold water line.
STEP
4
Connect the 1/4" Plastic Tubing
FROM SYSTEM HEAD INLET TO KITCHEN FAUCET ADAPTER INLET PORT:
1 Determine the length of 1/4" Plastic Tubing D that will be necessary to connect the System Head Inlet to the Kitchen Faucet
Adapter at the shut-off valve. Make sure to allow enough 1/4" Plastic Tubing to prevent kinking in the line.
2 Cut the 1/4" Plastic Tubing squarely on both ends.
3 Wet one end of the 1/4" Plastic Tubing with water and push it into the System Head Inlet until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
4 Wet the other end of the 1/4" Plastic Tubing with water and push it into the Kitchen Faucet Adapter Inlet Port until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
FROM SYSTEM HEAD OUTLET TO
5 Determine the length of 1/4" Plastic Tubing D that will be necessary to connect the System Head Outlet to the Kitchen Faucet Adapter
on the lower end of the plumbing line. Make sure to allow enough 1/4" Plastic Tubing to prevent kinking in the line.
6 Cut the 1/4" Plastic Tubing squarely on both ends.
7 Wet one end of the 1/4" Plastic Tubing with water and push it into the System Head Outlet until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
8 Wet the other end of the 1/4" Plastic Tubing with water and push it into the Kitchen Faucet Adapter Outlet Port until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
Kitchen Faucet Adapter
Kitchen Faucet Adapter
Kitchen Faucet Adapter
A
KITCHEN FAUCET ADAPTER OUTLET PORT:
3
3
STEP
E
D
F
2
3
INLET OUTLET
D
D
A
4
E
7
8
INLET OUTLET
A
A
4
STEP
Outlet Port
Inlet Port
COLD WATER
LINE
RIGID
TUBING
1