Installation Guide

A
C
C
D
B
INCORRECT
DuPont
™
FlexWrap
™
reverse flashed
INCORRECT
DuPont
™
StraightFlash
™
flush with DuPont
™
FlexWrap
™
CORRECT
DuPont
™
StraightFlash
™
overlaps DuPont
™
FlexWrap
™
8
Copyright ©2008 E. I. du Pont de Nemours and Company. All Rights Reserved. v.2
STEP 8
A. Install door according to manufacturer’s instructions.
B. (Optional)–see General Instructions. Adhere high pressure skirt to the bottom threshold of the door.
C. Cut two pieces of DuPont
™
StraightFlash
™
or DuPont
™
FlexWrap
™
for jamb flashing extending 1” above door head
flange and below bottom edge of sill flashing. Remove release paper and press tightly along sides of door frame.
D. Cut a piece of DuPont
™
StraightFlash
™
or DuPont
™
FlexWrap
™
for head flashing, which extends beyond outer edges of
jamb flashings. Remove release paper and install completely covering mounting flange and adhering to exposed
sheathing or framing members (see D).
DuPont
™
Flashing Systems Installation Guidelines
NOTE: Do not reverse shingle. DuPont
™
StraightFlash
™
must overlap DuPont
™
FlexWrap
™
and adhere
to the substrate.