Installation Guide

(S)
Sill Length
+ 12 inches
7-inch for 2x4-inch studs
9-inch for 2x6-inch studs
Overlap
Front
Back
Scored
Release
Paper
Break Scored
Release Paper
Peel Off
2-pieces
of Release
Paper
A
B
C
5
Copyright ©2008 E. I. du Pont de Nemours and Company. All Rights Reserved. v.2
STEP 2
Preparation of sill flashing:
A. Cut DuPont
™
FlexWrap
™
at least 12” longer than width of the sill (S).
B. DuPont
™
FlexWrap
™
has perforated release paper to help with the formation of the back dam. To ensure that the
perforation tears cleanly, fold the perforation 180° and crease the flashing.
C.Removethetwowidestpiecesofreleasepaperleavingthenarrowestreleasepaperontheashing.Whenthenished
floor is applied, the release paper can be removed and the back dam can be completed.