Instruction manual

96
When an old master remains on the drum, “MASTER EJECT MISS” is displayed on the LCD panel. Remove it by
following the procedure below.
Press the master ejection box r
elease lever to open
the master ejection box.
Open the master ejection box until it stops.
Press the JOG s
witch to find the edge of the
paper, then stop the drum at the position shown
in the diagram.
WARNING
• Do not touch the drum or rollers when you
operate the JOG switch.
• Do not put your hands inside the machine
while it is operating. Your hands may be
pulled in or nipped.
When “MASTER EJECT MISS” is Displayed
MASTER EJECT MISS
Master ejection box release lever