Instruction manual

This section describes how to make prints using the basic functions.

Tur

n ON the power. (

a See page 23, “Turning Power ON/OFF”)

• If the power is already ON, press

(ALL CLEAR) key.

Load paper. (

a See page 32, “Loading and Replacing Paper.”)

Load the document. (

a See page 34, “Loading

Documents”)

Adjust the slide guide to the marks for the size of the docu-

ment.

Place the document face down in the document tray.

Select the zoom ratio.

The zoom ratio is set to 100%.

Press

(ENLARGEMENT)key or

(REDUCTION)key to set a desired zoom ratio. (a See page 36,

“Enlargement and Reduction”.)

Press

(MASTER MAKING) ke

When the master has been made, one test print is automatically

made.

• The test print is for verification purposes only

and may be fainter than the final print.

• You can enter the number of desired prints

before pressing

(MASTER MAKING) key to

immediately print the required number of copies.

Basic Printmaking

IMPORTANT

REFERENCE