Service manual

3 EXTERNAL COVER SECTION
5-17
DUPLO DF-755 86V-M12D0-0
3 EXTERNAL COVER SECTION
3.1 Adjusting the interlock switch position
a. Top cover switch (SW1)
1) Open the top cover.
2) Make the following adjustments so that the switch is activated when the top cover is
closed.
• Secure the switch bracket at a position where the lever on the back of the top cover
presses down the actuator of the interlock switch to activate the switch.
[1]
Actuator
[2]
Switch bracket
• Secure the clearance [A] between the actuator and the switch body when the switch is
activated.
[1]
Actuator
[3]
Switch body
[A]
Clearance: 0.5 to 1.0 mm (0.02 to 0.04 inch)
[1]
[2]
[3]
[A]