Service manual

2 FOLDING SECTION
5-15
DUPLO DF-755 86V-M12D0-0
3) Lower the paper set lever to raise the paper
feed table.
4) Rotate the paper feed rings to send the
paper to the idler roller.
[5]
Paper feed ring
[6]
Idler roller
5) Rotate the idler roller to send the paper to
the first folding plate.
[6]
Idler roller
6) Send the paper until the paper lead edge
touches the folding stopper of the first
folding plate.
[7]
First folding plate
[8]
Folding stopper
7) Loosen the stopper securing screws and
adjust the stopper so that it is parallel to the
paper lead edge.
[9]
Securing screw .......................................... 2
8) Tighten the screws.
9) Adjust the parallelity of the second folding
stopper in the same way.
[10]
Second folding plate
[11]
Folding stopper
[12]
Securing screw ..........................................
2
[5]
[6]
[7]
[9]
[8]
B4 paper
Leading edge of the paper and the folding
stopper should be parallel to each other.
[10]
[11]
[12]
Leading edge or the paper and the folding
stopper should be parallel to each other.