Service manual

1 PAPER FEED SECTION
5-2
DUPLO DF-755 86V-M12D0-0
1 PAPER FEED SECTION
1.1 Adjusting the Paper Feed Table
To ensure the loading capacity of 500 sheets (64 g/m², 17 lb.), adjust the position of the hinge
lever roller unit by moving it up or down.
• Adjust the position of the hinge lever roller until the hinge lever touches the stopper
when you raise the paper set lever to lower the paper feed table.
• Adjust the position of the hinge lever roller until the the paper feed table stops at the
depth of 45 mm (1.77 inches) from the bending part of the lower paper feed gate unit.
[1]
Paper set lever
[2]
Paper feed table
[3]
Hinge lever
[4]
Roller unit
[5]
Stopper
[6]
Lower paper feed gate unit
[A]
45 mm (1.77 inches)
[A]
[4]
[3]
[5]
[1]
[6]
[2]