Service manual

1 LIST OF MAINTENANCE TOOLS
4-2
DUPLO DF-755 86V-M12D0-0
1 LIST OF MAINTENANCE TOOLS
1.1 General Tools
Tool name Main purpose
Phillips screwdriver General
Phillips screwdriver (Long)
Phillips screwdriver (Short)
Flat screwdriver (Large) For removing E-rings, etc.
Flat screwdriver (Small)
Long nose plier For install E-rings, removing/installing
springs, etc.
Plier
Spanner M3 (5.5 mm across) General
Spanner M4 (7.0 mm across)
Spanner M5 (8.0 mm across)
Spanner M6 (10.0 mm across)
Hexagonal wrench (1.5 mm across) For removing rough adjustsment knobs, etc.
Hexagonal wrench (2.0 mm across) For removing pulleys, etc.
Hexagonal wrench (2.5 mm across) For removing paper feed rings
SK binder For fixing wires
Thickness gauge Clearance adjustments
Nipper For cutting a SK binder
Tension gauge (2 kg)
For adjusting paper feed pressure
Chapter 5>1.2 Adjusting the Paper Feed
Pressure
For adjusting the MB belt
Chapter 5>1.7 Adjusting the MB belt
Tension
Tension gauge (5 kg)
For checking and adjusting press pressure
Chapter 5>2.1 Checking and Adjusting
Press Force
1.2 Special Tools
There are no special tools for this unit.