Service manual

4 PAPER EJECTION SECTION
3-21
DUPLO DF-755 86V-M12D0-0
6) Remove the ejection belt and stacker plate.
Note
When attaching the MB belt, adjust its tension.
Refer to "Chapter 5>1.8 Adjusting the Ejection Belt Tension."
4.2 Ejection Gate Sensor
4.2.1 Removing the Ejection Gate Sensor (PS2e, PS2r)
1) Remove the first folding plate and second folding plate.
2) Remove the cover for electronic components.
Refer to "1.4.1 Removing the cover for electronic components."
3) Remove the lower paper feed gate.
[1]
Screw ......................................................... 2
[2]
Lower paper feed gate
4) Remove the bearing (operator's side).
[3]
Screw ......................................................... 2
[4]
Bearing ...................................................... 1
[1]
[2]
[3]
[4]