Service manual

4 PAPER EJECTION SECTION
3-19
DUPLO DF-755 86V-M12D0-0
4 PAPER EJECTION SECTION
4.1 Stacker Section
4.1.1 Removing the stacker roller
1) Remove the upper screw (non-operator's
side).
2) Loosen the lower screw (non-operator's side).
3) Remove the stacker roller.
[1]
Upper screw .............................................. 1
[2]
Lower screw .............................................. 1
[3]
Stacker roller
4.1.2 Removing the ejection belt
1) Remove the paper receiving tray.
[1]
Nut (non-operator's side) ......................... 1
[2]
Spring washer (non-operator's side) ........ 1
[3]
Pillar (non-operator's side) ....................... 1
[4]
Washer (non-operator's side) ...................
1
[5]
Paper receiving tray
2) Remove the screws of the stacker plate.
[6]
Screw ......................................................... 4
3) Remove the MB belt.
"1.4.3 Removing the MB belt"
[3]
[2]
[1]
[1]
[2]
[3]
[4]
[5]
[6]