Service manual

2 PAPER FEED SECTION
3-10
DUPLO DF-755 86V-M12D0-0
2.1.3 Removing the paper separator plate
1) Remove the paper feed shaft unit.
Refer to "2.1.1 Removing the paper feed shaft
unit."
2) Remove the paper feed gate.
[1]
Screws ....................................................... 2
[2]
Paper feed gate unit
3) Remove one of the E ring from the paper
separator plate.
[3]
E ring ........................................................ 1
4) Remove the shaft.
[4]
Shaft .......................................................... 1
5) Remove the paper separator plate.
[5]
Paper separator plate
2.1.4 Removing the paper sensor (PS1)
1) Remove the stacker roller.
Refer to "4.1.1 Removing the stacker roller."
2) Remove the cover plate.
[1]
Screws ....................................................... 2
[2]
Cover plate
3) Disconnect the connector of PS1.
[3]
Connector .................................................. 1
4) Remove the screws from PS1.
[4]
Screws ....................................................... 2
5) Remove PS1.
[5]
PS1
[1]
[2]
[3]
[4]
[5]
[1]
[4]
[2]
[5]
[3]