Service manual

1 EXTERNAL COVER/CONTROL SECTION
3-6
DUPLO DF-755 86V-M12D0-0
4) Remove the connector.
[3]
Connector .................................................. 2
[4]
SK binder .................................................. 1
[5]
Bushing ..................................................... 1
5) Remove the MB belt.
Refer to "1.4.3 Removing the MB belt."
Note
When attaching the MB belt, adjust its tension.
Refer to “Chapter 5>1.7 Adjusting the MB
belt Tension."
6) Remove the nut securing the AC motor (M1)
to the frame.
The screw plates will come off.
[6]
Bolt ............................................................ 2
[7]
Spring washer ........................................... 2
[8]
Washer ......................................................
2
[9]
Screw plate ............................................... 2
8) Remove M1.
[10]
M1
1.4.5 Removing the solenoid
1) Remove the cover L.
2) Remove the connector.
[1]
Connector .................................................. 1
[2]
Screw ......................................................... 1
[3]
Clamp ........................................................ 1
3) Remove the solenoid.
[4]
Screw ......................................................... 2
[5]
Solenoid
Note
When attaching the solenoid, adjust its position
so that it can be pulled back or drawn back
properly.
Refer to "Chapter 5 > 1.4 Adjusting
Solenoid."
[3]
[4]
[3]
[5]
[9]
[10]
[6]
[7]
[8]
[2]
[4]
[1] [5]
[3]