Service manual

5 USER MENU
1-10
DUPLO DF-755 86V-M12D0-0
5.2 Paper Feed Adjustments
5.2.1 Correcting folding misalignment along sides of paper
When folded paper is misaligned along the sides of paper as shown in the figure, turn the
slant correction knob [1] to correct the misalignment. The correction range is within ±0.5
mm (0.02 inch).
[1]
1) Turn the slant correction knob [1] to adjust the
folding slippage.
If folding slippage is as shown in Figure A,
turn the knob in the direction of the arrow.
If folding slippage is as shown in Figure B,
turn the knob in the direction of the arrow.
2) After adjustment, be sure to turn the slant
correction knob [1] to align the round holes [2]
of the paper feed table with the pin [3].
[1]
[1]
[2]
[3]
[1]