Datasheet
Designed for a variety of miniature-sized accurate position feedback
applications, the Duncan 9600 Series Linear Position Sensor Module is ideally
suited for use where reliability in a harsh operating environment is a primary
consideration.
Use in industrial, vehicular, appliance, machine tool, and robotic applications
is benefited by the unit’s features that include high temperature-stable
materials, solderable terminal tabs suitable for use with 2,8 mm PDQ styled
crimped wiring lugs, and a durable spring-loaded design to returns shaft
to extended position.
The 9600 Series is available in three standard strokes and
provides excellent long life (up to 5 000 000 cycles);
resistance, voltage and linearity characteristics.
0%
100%
Mechanical electrical travel
Total electrical travel
Active electrical travel
Note: For travel outside the active electrical tra-
vel, linearity may exceed specified tolerances.
0,8
Typical
2 places
Linear sensor 12-38 mm
9600 series
Specifications*
Model 9605 9610 9615
Total electrical travel, A (mm) 12,7 25,4 38,1
Active electrical travel G (mm) 10,0 22,8 35,6
Mechanical travel, B ±0,4 (mm) 14,2 26,9 39,6
Total DC resistance ±25%(kΩ) 1,7 3,4 5,1
Linearity over active travel (± %) ±2,0 ±2,0 ±2,0
Best practical linearity (%) ±1,0 ±0,5 ±0,35
Power rating at 70°C (W) 0,25 0,5 0,75
Max supply voltage at 70 °C (V) 18 35 40
Housing length C ±0,4 (mm) 26,9 39,6 52,3
Terminal spacing D (mm)
E (mm)
7,6
5,1
12,7
12,7
20,3
17,8
Fully extended length F ±0,4 (mm) 20,6 33,3 46,0
Repeatability Within 0,013 mm
Mechanical life Up to 5 000 000 Cycles
Stop strength (N) 100
Actuation force (N) 4,0 Maximum, supplied with internal
spring to return actuator to extended
position
Humidity 95% @ 38°C
Vibration 15 Gs, 50 to 1000Hz, 2hrs, each plane
Shock Up to 50 Gs
Temperature range -40°C - +135°C
Recommended input impedance 100 x sensor resistance
*Most specifications may be altered to meet specific requirements
E 02.11/1
Schematic
Retract
1 3
2
Spring return
Specifications subject to change without notice
BOX 1312, S-751 43 UPPSALA, SWEDEN. TEL +46 (0)18 65 70 00. FAX +46 (0)18 10 74 78. E-mail: info@regal.se http://www.regal.se