Operation Manual

Code Rev. D 20140818 (IEC)
16
CARE AND MAINTENANCE
WARNING: Failure to unplug the appliance during
service and cleaning could result in electrical shock
or other personal injury.
REMOVING SHELVES
To remove any of the shelves from the rail
compartment, move the shelf to the position where
the notch of wooden shelf is exactly under the
plastic post and then lift it up and out.
In order to replace the shelf, repeat steps described
above in reverse. And make sure to engage the
shelves with the small pegs of the extended rails
when the model is equipped with roller system.
HUMIDITY CONTROL
The appliance is equipped with a system for
maintaining the correct level of humidity. Under
extremely dry environmental conditions, you may
have to add some water into the humidity box
provided with your wine cellar.
Fill the small plastic reservoir (humidity box) ¾ full
with water, and fit onto the runners found on the top
shelf of the appliance. Check the water level
regularly and refill as necessary.
Please ensure the reservoir is positioned correctly
on the runners on the top shelf to avoid the
possibility of water spillage.
ACTIVE CHARCOAL AIR FILTER
The active charcoal air filter is located in the back of
compartment. Replace it with a new one once a
year. It can be purchased from your dealer or from
the Spare Parts Department.
 Remove the shelf in front of the filter.
 Grip the filter and turn it 90°clockwise or anti-
clockwise to remove.
 Insert the new filter in the vertical position and
turn it 90° clockwise or anti-clockwise until it
clicks into position.
DOOR LOCK
If the unit is provided with a lock system, the keys
are located inside the plastic bag that contains the
Owner’s Manual. Insert the key into the lock, push in
and turn it counterclockwise to unlock the door. To
lock the door do the reverse operation making sure
metal pin is engaged completely. Remove the key
and place it in a secure place for safekeeping.
CLEANING YOUR APPLIANCE
Turn off the power, unplug the appliance, and
remove all items including shelves and rack.
Wash the inside surfaces with a warm water and
baking soda solution. The solution should be about 2
tablespoons of baking soda to a pint of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when
cleaning any area of the controls.
Wash the outside cabinet with warm water and mild
liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
Do not clean the stainless steel with steel wool
pads. Suggest to using an all-in-one stainless steel
cleaner to clean the stainless steel and always clean
in the direction of grain.
POWER FAILURE
In the event of a power interruption, all previous
temperature settings are automatically memorized. If
power is interrupted (power surge, breaker switch,
etc.) and then powered up again, the unit will
operate with the last temperature set-point.
Most power failures are corrected within a few hours
and should not affect the temperature of your
appliance if you minimize the number of times the
door is opened. If the power is going to be off for a
longer period of time, you need to take the proper
steps to protect your contents.