Operation Manual
Code Rev. D 20140818 (IEC) 
12 
Setting the Temperature Control 
  The  unit  has two separate  temperature  zones. 
The  temperature  of  both  zones  can  be  set 
between  5ºC and  22ºC  (41ºF and  72ºF).  The 
LOWER/RIGHT temperature zone is ideal for 
storing  white and  red  wine  at  a  setting  of 13°C 
to  22°C  (55°F  to  72°F).  The  UPPER/LEFT 
temperature  zone  is  suitable  for  storing 
champagne and white wine at  a setting  of  5°C 
to 13°C (41°F to 55°F). 
  When the unit is plugged in for the first time, the 
unit will  power up  automatically to  the  preset 
defaults. The  preset temperature  at the factory 
for  UPPER/LEFT  temperature  zone  is  10ºC 
(50ºF)  and  for  LOWER/RIGHT  temperature 
zone is 16ºC (60ºF). 
  You can press the left side UP and DOWN keys 
to  control  the  internal  temperature  of  the 
UPPER/LEFT  temperature  zone  and  press the 
right  side UP  and DOWN  keys to  control  the 
internal  temperature  of  the  LOWER/RIGHT 
temperature  zone.  When  you  press  the  two 
keys at the first time, the display will show the 
last temperature set previously. 
  IMPORTANT:  The  temperature  set  for  the 
LOWER temperature zone must always be just 
as  high  or  higher  than  that  in  the  UPPER 
temperature zone. For optimal performance, the 
set temperature  of the  two  zones should  differ 
by at least 4°C. 
  The  temperature  that  you  desire  to  set  will 
increase  1ºC  or  1ºF  if  you  press  the  UP  mark 
once,  on  the  contrary  the  temperature  will 
decrease 1ºC  or  1ºF if  you  press  the  DOWN 
mark once. The display flashes while you make 
the setting.  
  After the temperature has been set, the display 
shows  the  current  inner  temperature  of  the 
particular temperature zone. 
  To view the set temperature at any time, press 
the UP  or DOWN key, the set temperature will 
temporarily  flash  in  the  display  for  5  seconds. 
Then  the  display  shows  the  current  inner 
temperature again. 
USE AND CONTROL – THREE ZONE 
The Controls of Your Unit 
Upper Control Unit 
Lower Control Unit 
POWER   
To turn  the appliance on/off, press and hold  the   
key  for  5  seconds  until  themperature  display lights 
up or goes out. 
NOTE: Pressing the   key once can switch off the 
audible alarm when the alarm is on. 
LIGHT   
Used to turn the inner light on/off. 
UP     
Used to increase (warm) the set temperature by 1°C 
or 1ºF. 
DOWN     
Used to decrease (cool) the set temperature by 1°C 
or 1ºF. 
Display 
Display  the  digital  temperature  and  service 
indicators.   is for  UPPER  temperature zone,   is 
for MIDDLE temperature zone and   is for LOWER 
temperature zone. 
Indicator Light 
The indicator light is located at the right lower corner 
of the display. The indicator light will be on when the 
multi-key function is selected. To perform the multi-
key function, press and hold the first key, then press 
the rest key for at least 5 seconds and then release 
all the keys. 
ºF/ºC Selector 
Select the temperature display setting in Fahrenheit 
or Celsius degree. To change the temperature from 
Fahrenheit to Celsius or from Celsius to Fahrenheit, 
press and hold the LIGHT key for 5 seconds. 
Setting the Temperature Control 
  The  unit  has  three  temperature  zones.  The 
temperature of all zones can be set separately. 
  The  temperature  settings  of  UPPER 
temperature zone are adjustable with the range 










