Instruction manual

�6�
INSTRUCTION MANUAL
1st Step -Remove the gasket on the internal door
Gasket
Flat Washer
Locker Washer
Screw
Handle
Door Frame
to expose the two screw holes�
2nd Step -Install the handle tightly with the
screws and washers provided�
3rd Step -Restore the gasket�

HOW TO REVERSE THE DOOR HANDLE
For a unit with reversible door swing function, please follow the following steps to
reverse the door handle (based on the door handle has been originally installed on the
left side of the front door)�
1st Step - Remove the gasket at the right inner side of
Figure1
1
the door to expose the 2 decoration screws
A
� Unscrew them in a clockwise direction
with a straight screwdriver at first, and then
loosen them in a counter-clockwise direction
by fingers from the outer side of the door�
Now the screw holes are ready for installing
the handle to the right side� See Figure 1�
2nd Step - Remove the gasket at the left inner side of
Figure2
2
3
4
the door to expose the 2 handle screws
B
�
Unscrew them in a counter-clockwise
direction with a cross screwdriver, take out
the screws and the washers
C
as well as the
handle
D
� See Figure 2�
3rd Step - Install the handle to the outer right side of the door� See Figure 3�
4th Step - install the 2 decoration screws
E
to the holes at the left side of the outer
door (backwards to the steps of unscrewing it)� See Figure 4�