Instruction manual

�15�
INSTRUCTION MANUAL

FOR BUILT-IN-COLUMN SERIES
Remarks:
●
•
Reversible door swing function is only available for a unit with 4 handle screw holes
reserved on the front door (2 at the left side and 2 at the left side)�
●
•
The instruction is only suitable for a unit with control panel on the door�
●
•
The instruction is based on a unit with right door hinge installed already�
●
•
To reserve the door from right hinge to left hinge, you need to get ready 3 new spare
parts: upper left hinge, upper left hinge cover, right door corner cover�
●
•
All removed parts must be saved to do the door reinstallation, except those remarked
with “Disused”�
1st step – Takedown the Door� See Figure 1�
1� Loosen the 2 screws
with a cross screwdriver, and take out the upper right
hinge cover (Disused)� There are two wiring harnesses
D
&
E
with their terminals
connected together�
2�Disconnect the two wiring harnesses, and loosen the 3 screws
to take out the
upper right hinge�
3� Loosen the 4 screws
& the 1 screw
H
to take out the bottom hinge�
4� Carefully take the whole door out�
7
3b
8
Figure1
1a
2
3a
4
6
5
7
3b
8
9
10
1a
2
3a