Instruction manual

�14�

INSTRUCTION MANUAL

REVERSE THE DOOR SWING



FOR BUITL-UNDER SERIES

Remarks:

●

•

Reversible door swing function is only available for a unit with 870mm height, and

with control panel inside the cabinet�

●

•

The instruction is based on a unit with right door hinge installed already�

●

•

To reserve the door from right hinge to left hinge, you need to get ready 2 new spare

parts: an upper left hinge, and a bottom left hinge�

●

•

All removed parts must be saved to do the door reinstallation, except those remarked

with “Disused”�

1st Step -Open the door, and loosen the 2 screws

and

� See Figure 1�

2nd Step -Carefully remove the door from the upper right hinge

and prevent it

from scratching� Take out the support rod

from the door hinge hole� See

Figure 2�

3rd Step -Pull out the 6 decorating plastic bolts covering the reserved hinge screw

holes at the front left corner of the cabinet�

4th Step -Unscrew the upper right hinge

(Disused) and bottom left hinge

(Disused) from the cabinet� See Figure 3�

-install the upper left hinge

and bottom left hinge

to the left side of the

cabinet� Make sure the screws are tightened� See Figure 4�

5th Step -Reverse the door handle by following the instruction of “How to Reverse the

Door Handle” as mentioned above�

6th Step -Cover the hinge screw holes on the right side with the 6 decorating plastic

bolts�