Instruction manual

�11�
INSTRUCTION MANUAL
appliance to achieve the temperature you have set�

TEMPERATURE SETTING
For Single Zone
•
The temperature setting range is 5-22
ºC
(41-72
ºF
)�
•
Directly touch the or mark to set the wine cooler temperature as you want�
•
The first touch on or mark will recall the previous set temperature displayed
in the digital window� If the appliance runs after a power failure (or unplugging), the
previous set temperature does not exist and is replaced by the defaulted temperature
at 12
ºC
�
•
Touch the mark to increase the set temperature by 1
ºC
� On the contrary, touch
the mark to decrease the set temperature by 1
ºC
�
•
The digital will change to display the real temperature of the inside cabinet after 10
seconds without being touched�
For Dual Zone
•
The temperature setting ranges are 5-12
ºC
(41-54
ºF
) for the upper zone and 12-22
ºC
(54-72
ºF
) for the bottom zone�
•
You need to select the set zone by touching the mark before touching the mark
or to set the wanted temperature� The display window with digital flashing
indicates the zone ready for temperature setting�
•
The first touch on mark or will recall the previous set temperature displayed
in the digital window� If the appliance runs after a power failure (or unplugging), the
previous set temperature does not exist and is replaced by the defaulted temperature
at 10
ºC
for the upper zone while 16
ºC
for the bottom zone�
•
Touch the mark to increase the set temperature by 1
ºC
� On the contrary, touch
the mark to decrease the set temperature by 1
ºC
�
•
The digital will change to display the real temperature of the inside cabinet after 10
seconds without being touched�
Note:
For the first time to use the appliance or to restart the appliance after having been
shut off for a long time, you may find a few degrees variance between the set
temperature and the displayed temperature� It is normal and everything of the
appliance will be in the order after a few hours running

SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks with 2 fingers at the same time and hold for 5 seconds, you
can interchange the Fahrenheit and Celsius display�