Use and Care Manual

www.factorybuysdirect.com
M180017-16
OPERATING INSTRUCTIONS
NOTE: When you rst turn the heater on, it may emit a slight but harmless odor.
This odor results from certain oils or greases being heated as the appliance is
used for the rst time. This odor is perfectly safe and will stop shortly, it will not
reoccur after the rst operation of the appliance.
CONTROL PANEL OPERATION:
A
B C D E F
Button (A): “ON” / “OFF” Button
Push button A to turn electric replace on, power icon on front screen will turn
yellow, the ame effect will come on when the electric replace is on. Push button
A again, power icon will disappear, no ame effect.
Temperature Buttons - Increase (B) and Decrease(C)
This electric replace is equipped with a thermostat. Press the Temperature but-
ton B to increase the temperature. (The electric replace heater and fan will only
turn on if the temperature setting is higher than the room temperature. Heating
icon will light up while heating.)
Press the Temperature button C to decrease the temperature. (The electric re-
place heater and fan will turn off if the temperature setting is lower than the room
temperature. Heating icon will disappear.)
Button (D): Dimmer
Push button D when electric replace is on, dimmer icon on front screen starts
ashing. Push button B to increase the ame effect, push button C to decrease
the ame effect.
Button (E): Timer
Push button E when electric replace is on, digit icon on front screen starts ash-
ing. Push button B to increase time, time will be increased by the following se-
quence: 00-30-1H-2H-3H-4H-5H-6H-7H-8H-9H. Push button C to decrease time.
(NOTE: Timer is approximate and extreme caution is necessary when the electric
replace is left operating and unattended. Keep children, individuals and pets
away from the unit when in use.)