Instructions / Assembly

www.factorybuysdirect.com
13200200-01C
INSTALLATION
3. Attach gas line to replace gas regulator.
See Connecting to Gas Supply, page 14.
4. Check all gas connections for leaks. See
Checking Gas Connections, page 16.
IMPORTANT: When nishing your rebox,
combustible materials such as wall board,
gypsum board, sheet rock, drywall, plywood,
etc, must have 1/2" clearance to the sides
and top of the rebox. Combustible materials
should never overlap the rebox front facing.
Figure 9 - Rough Opening for Corner
Installation
Figure 10 - Installing Fireplace Insert Into
Mantel
CABINET MANTEL
If using a cabinet mantel, assemble following the instructions included with
the mantel at this time.
Note: Some mantels are designed with physical and chemical distress to
enhance the realistic appearance of the wood.
19"
25
1
/
8
"
90°
15
5
/
8
"
36
1
/
2
"
1. Carefully push the replace insert into
the mantel from the front as shown in
Figure 10.
2. Position the replace against the wall in
the desired location.