Instructions / Assembly
www.factorybuysdirect.com
200423-01A25
OPERATION
Note: If pilot does not stay lit, refer to
Troubleshooting, pages 29 through 32. Also
contact a qualied service technician or gas
supplier for repairs. To light pilot with match,
see Manual Lighting Procedure.
7.
-
Note" If pilot goes out, repeat steps 3
through 7. This replace has a safety in-
terlock system. Wait one (1)minute before
lighting pilot again.
8.
-
9.
10.
Shutting O Fireplace
1.
2.
Shutting O Burner Only (pilot stays lit)
1.
2.
3.
4. -
5.
INSPECTING BURNERS
IMPORTANT: Owner's should check pilot ame pattern and burner ame pattern often.
Incorrect ame patterns indicate the need for cleaning (see Care and Maintenance, page
27) or service.
CAUTION: Do not try to adjust
heating levels by using the
equipment shuto valve.
WARNING: Only a qualied service person should service and
repair replace. This includes maintenance requiring replacement
or alteration of components.
TO TURN OFF GAS TO APPLIANCE
MANUAL LIGHTING PROCEDURE