Instruction Manual

Page 25
PRO RXqp Installation and User’s Manual
• Welcome screen of RAID Console after successful login:
5.1.3. Built-in Ethernet
If the PRO RX’s Ethernet port is connected to the network, and you know the IP
address of the PRO RXqp, you can use any computer on the network via any
web browser to connect to the RAID Console and manage the PRO RXqp.
You can discover the PRO RXqp IP address by using the local computer that is
connected to the PRO RXqp, launch the appropriate RAID Console. The
Ethernet Configuration page is at System Controls > EtherNet Config.
Page 26
PRO RXqp Installation and User’s Manual
5.2. Change RAID Mode – Deleting / Creating
This procedure will erase all data on the PRO RXqp.
Changing the RAID mode requires the current RAID Set to be deleted
first, and then create a new RAID Set with the new RAID mode.
5.2.1. Delete the RAID Set
From the RAID Console GUI. On the left side menu bar click on
• RaidSet Functions > Delete Raid Set
• Select the Raid Set and check the Confirm box
• C lick Submit to delete the RAID Set