User guide

Page 12
PRO
FC
Installation and User’s Manual
4. Installation
Please follow these few steps to install the
about 30
minutes to complete.
Overview of installation:
•
Rackmount installation
•
Disk Module Installation
• FC Cable Install
ation
•
Ethernet Configuration
• RAID Manager
Installation
By default, the
PRO
pre-
formatted for Apple Mac OS X.
for your exact configuration.
Windows operation will require a format/partition process. The
FC is shipped
already pre
Windows Disk Management utility to prepare the RAID for Windows
usage.
4.1.
Rackmount Installation
The PRO FC
can be rackmounte
required.
An optional rackmount kit is available for 24”
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
Adjust depth as required.
Mount the left and
right sliders on the PRO FC
The PRO
FC loaded with Disk Modules will be
FC
to the rack before installing the drives will make it easier.
the PRO FC
carefully on the rack by aligning the sliders in the rails.
Installation and User’s Manual
Please follow these few steps to install the
PRO FC. T
his process typically takes
minutes to complete.
Rackmount installation
Disk Module Installation
ation
Ethernet Configuration
Installation
PRO
FC is shipped pre-configured in RAID
5
formatted for Apple Mac OS X.
Check the Pre-
configuration Sheet
for your exact configuration.
Windows operation will require a format/partition process. The
already pre
-configured in RAID 5. S
imply run the
Windows Disk Management utility to prepare the RAID for Windows
Rackmount Installation
can be rackmounte
d to a standard 19” rack. 3u height space is
An optional rackmount kit is available for 24”
to 30” depths.
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
right sliders on the PRO FC
.
FC loaded with Disk Modules will be
heavy, install the PRO
to the rack before installing the drives will make it easier.
carefully on the rack by aligning the sliders in the rails.
his process typically takes
5
mode and
configuration Sheet
Windows operation will require a format/partition process. The
PRO
imply run the
Windows Disk Management utility to prepare the RAID for Windows
d to a standard 19” rack. 3u height space is
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
heavy, install the PRO
to the rack before installing the drives will make it easier.
Install
carefully on the rack by aligning the sliders in the rails.
Page 13
PRO
FC
Installation and User’s Manual
4.2. Disk Module Installation
Remove the front bezel. Install each marked Disk Module into the slot indicated.
Pull the lock of the Disk Module left to open the latch. Insert into slot until latch
begins to close, close latch to lock Disk Module into place.
DO NOT ship the PRO FC with the Disk Modules installed, the Disk
Modules MUST be packaged separately in a single or multi-pack to
properly protect them during shipment.
Slider
Rail mounted
to rack.