Specifications

Installation & Operation Manual for Flexible Batch Broiler
Australian Units
28
V. REPLACEMENT PARTS LIST
Parts that will likely require replacement during the life of the broiler are identied with a “◄ “ in the Replacement
Parts List. The “Ǿ” symbol in the list identies parts that are protected and shall not be or cannot be adjusted by the
user. Parts identied with a ”-“ should not require adjustment or replacement during the broiler life, but are listed to
assist qualied service personnel if replacement is necessary.
P/N
DESCRIPTION
175503
SWITCH,LIGHTED,DPST
-
175780
BURNER,INFRARED
◄ , Ǿ
175950
KIT, BURNER, ADJUSTABLE
◄ , Ǿ
175875
MOTOR-CONVEYOR
-
175517
SPROCKET, B21X3/8 BORE (MOTOR)
Ǿ
175037
SHAFT,DISCHARGE SIDE
Ǿ
175038
SHAFT,RIGHT SIDE
Ǿ
175802
CAPACITOR,MOTOR-CONVEYOR
Ǿ
175876
MODULE IGNITION (7-5-3) CE (PROPANE, LOWER BURNER ONLY)
◄ , Ǿ
175877
MODULE IGNITION (24-5-3) CE
◄ , Ǿ
175765
TRANSFORMER,40VA, 230VAC-24VAC
Ǿ
175977
PROBE,TEMP., C-CHAMBER
Ǿ
175550
LIGHT, COOK
-
175870
RELAY - SOLID STATE
◄ , Ǿ
175551
CHAIN, DRIVE
Ǿ
175918
CONTROLLER
Ǿ
175510
GASKET, CONTROL BEZEL
-
175511
GASKET, BLOWER INLET
-
176240
BLOWER, DAYTON 230V 50HZ
◄ , Ǿ
175532
HOSE, BLOWER
◄ , Ǿ
175542
ORIFICE HOLDER, IR
-
175920
VALVE, GAS, COMBO
◄ , Ǿ
175823 ORIFICE, 3.05mm, LOWER BURNER (NATURAL GAS) Ǿ
175953 ORIFICE, 1.85mm, LOWER BURNER (PROPANE GAS) Ǿ
175814 ORIFICE, IR FRONT, 2.35mm (NATURAL GAS) Ǿ
175815 ORIFICE, IR REAR, 2.50mm (NATURAL GAS) Ǿ
175816 ORIFICE, IR FRONT, 1.55mm (PROPANE GAS) Ǿ
175817 ORIFICE, IR REAR, 1.61mm (PROPANE GAS) Ǿ
176368
ORIFICE HOLDER 3/8 COMP. STRGHT X BULKHEAD
Ǿ
175476
TUBING-TEE TO IR,KIT
Ǿ
175477
TUBING-TEE TO VALVE,KIT
Ǿ
175478
TUBING-LOWER BURNER TO VALVE,KIT
Ǿ