Specifications

19
Installation & Operation Manual for Flexible Batch Broiler
Australian Units
C-2. Daily Cleaning (cont’d)
Clean the top of the burner
with the brush end of the “Tube
Burner Cleaning Tool”.
For heavy build-up, use the
scraper end of the “Tube Burner
Cleaning Tool”.
Use the end of the tool to
clean the discharge shaft of
the conveyor.
With the broiler cool, lift and
remove the ipper door.
Clean and set aside.
1
2
Lift and slide retaining bolt right.
1
2
Lift slightly and remove loader
ramp as shown.
Disengage pin from pivot hole.
Clean and set aside.
Discharge End Panel:
Remove discharge accessories
and lift panel up while swinging
out and down.
Discharge Scraper:
Lift up and pull forward.
Discharge Scraper:
Pull out removing locating pins
from slots. Clean scraper and
area. Replace.