Service manual

9
Service Manual for Flexible Batch Broiler Units
Discharge Pan
The Discharge Pan is located on the discharge side of
the broiler below the Discharge Hood and is used to
support the PHU Holding Pan (not supplied).
1. Remove the PHU Holding Pan if present.
2. Slide Discharge Pan up and out of keyhole slots.
3. Install Discharge Pan by lowering it into the
thumbscrews.
Discharge
Pan
Discharge Pan
Discharge Grease Pan
The Discharge Grease Pan is located below the
Discharge Pan and catches any grease drippings.
1. Tilt Discharge Grease Pan up to unhook and pull
forward to remove.
2. When installing the Discharge Grease Pan, be sure
to tilt up and push all the way back.
NOTE: Correct positioning will not allow pan removal
without upward tilt.
Discharge
Grease
Pan
1
2
Discharge Grease Pan