Service manual

11
Service Manual for Flexible Batch Broiler Units
Loader Tray
The Loader Tray is located on the front of the broiler
and slides into the channels on the Loader Brackets.
1. Remove Loader by sliding it out of the Loader
Tray.
2. Remove Loader Tray from the Loader Brackets by
pulling forward and disengaging ears on Loader
Tray from keepers on the Loader Brackets.
3. Install Loader Tray by sliding it into bracket and
engaging ears with keepers.
Loader
Carriage
Loader
Bracket
Ear
Loader Tray
Conveyor Drive Motor Cover
The Conveyor Drive Motor Cover, located on the lower
front of the broiler on the discharge side, covers the
Drive Chain Motor.
1. Remove the Main Grease Pan and the V Grease
Pan.
2. Remove the three screws securing the cover to the
broiler.
3. Lift Conveyor Drive Motor Cover off the broiler.
Conveyor
Drive
Motor
Cover
Conveyor Drive Motor Cover