Welding System User Manual
Page 3
Section 1 – Introduction
Dukane Manual Part No. 403-577-01
General User Information
Read This Manual First
Before operating your ultrasonic system, read this User’s
Manual to become familiar with the equipment. This will
ensure correct and safe operation. The manual is orga-
nized to allow you to learn how to safely operate this gen-
erator. The examples given are chosen for their simplicity
to illustrate basic operation concepts.
Notes, Cautions and Warnings
Throughout this manual we use NOTES to provide in-
formation that is important for the successful applica-
tion and understanding of the product. A NOTE block is
shown to the right.
In addition, we use special notices to make you aware
of safety considerations. These are the CAUTION and
WARNING blocks as shown here. They represent in-
creasing levels of important information. These state-
ments help you to identify and avoid hazards and rec-
ognize the consequences. One of three different symbols
also accompany the CAUTION and WARNING blocks
to indicate whether the notice pertains to a condition or
practice, an electrical safety issue or a operator protection
issue.
Drawings and Tables
The gures and tables are identied by the section num-
ber followed by a sequence number. The sequence num-
ber begins with one in each section. The gures and
tables are numbered separately. The gures use Arabic
sequence numbers (e.g. –1, –2, –3) while the tables use
roman sequence numerals (e.g. –I, –II, –III). As an ex-
ample, Figure 3–2 would be the second illustration in
section three while Table 3–II would be the second table
in section three.
Condition
or Practice
Electrical
Hazard
Hearing
Protection
CAUTION
C a u t i o n s t a t e m e n t s
identify conditions or
practices that could result
in damage to the equip-
ment or other property.
WARNING
Warning statements
point out conditions or
practices that could re-
sult in personal injury or
loss of life.
NOTE
Note statements provide additional
information or highlight procedures.