Welding System User Manual

Section 9 – Specications
Page 61
Dukane Manual Part No. 403-577-01
Regulatory Agency
Compliance
CAUTION
D O NO T m a k e a n y
modifications t o the
generator or associated
cables as the changes
may result in violating
one or more regulations
under which this equip-
ment is manufactured.

FCC
The generator complies with the following Federal
Communications Commission regulations.
• The limits for FCC measurement procedure MP-5,
“Methods of Measurement of Radio Noise Emissions
from ISM Equipment”, pursuant to FCC Title 47 Part
18 for Ultrasonic Equipment.
CE Marking
This mark on your equipment certies that it meets the
requirements of the EU (European Union) concerning
interference causing equipment regulations. CE stands
for Conformité Europeéne (European Conformity). The
generator complies with the following CE requirements.
• T h e E M C D i r e c t i v e 2 0 0 4 / 1 0 8 / E C
for Heavy Industrial —
EN 61000-6-4: 2001
EN 55011: 2003
EN 61000-6-2: 2001
EN61000–4–2
EN61000–4–3
EN61000–4–4
EN61000–4–5
EN61000–4–6
EN61000–4–8
EN61000–4–11
• The Low Voltage Directive 2006/95/EC.
• The Machine Directive 98/37/EC.
EN 60204-1: 2006
Safety of Machinery - Electrical Equip-
mentofMachinesPart1:Specication
for General Requirements.
Effective 12/29/09:
The Machinery Directive 2006/42/EC.
EN 60204: 2006
Safety of Machinery - Electrical Equipment
of Machines Part 1: General Requirements.