Welding System User Manual
Page 35
Section 6 – Probes and Probe Stacks
Dukane Manual Part No. 403-577-01
Figure 6-1 Typical Hand Held Probes
U/S Cable
Typical Horn Less Tip
Models
Pistol-style Grip
Hanger
Trigger
Typical Horn Less Tip
U/S Cable
Trigger Actuator
Hand Grip
Compressed Air Fitting
Strain Relief
Strain Relief
Rear View
Rear View
Compressed Air Fitting
41PG40 & 41PG40S
Models
41HP40 & 41HP40S
Hanger
Ultrasonic Probe
Overview
The two types of probes used with the iQ Hand Held
Systems are shown in Figure 6-1 below.
Operating Notes
Compressed Air Fitting - In continuous duty
operation, it is important to keep the probe cool with
compressed air. Use the air tting to connect the air source
to the probe.
See Section 7, Specications for more detail.
CAUTION
The ultrasonic cable car-
ries high electrical current
when in operation. Do not
nick or cut this cable. If
cut, there would be a high
potential for electric shock!
NOTE
Compressed air supply: Make sure
the air is clean, oil-free, and dry.