Welding System User Manual

Page 29
Section 5 - Process Control Settings
Dukane Manual Part No. 403-577-01
Advanced Settings Continued
Trigger by Power
For an explanation of Trigger by Power and the three
settings that are connected with it, please refer to
Application Note 506 found on our website at:
http://www.dukane.com/us/DL_ApplData.asp
When Trigger by Power is selected, three additional
settings screens are presented:
• Trigger Amplitude;
• Trigger Power; and,
• Trigger Timeout
See Figures 5-15, 5-16, and 5-17 for previews of these
screens
Figure 5-15 Trigger Amplitude
Figure 5-16 Trigger Watts
Figure 5-17 Trigger Timeout
Trigger By Power
Amplitude
40 %
_
Trigger By Power
Watts
80 W
_
Trigger By Power
Timeout
1.100 S
_