User guide

Removing a Registered Presence
In systems equipped with IR location, presence is automatically removed when the staff
member IR badge is sensed in another location.
To remove a registered presence using a presence station, press the illuminated red, am
-
ber, or green button on the station that corresponds to your registered staff level (Figure
4-4 on the preceding page). You may also press the System Monitor button on the station
(see Figure A-5 on page A-9) or press and hold CANCEL for 2 seconds (see Figure 4-1
on page 4-1). When you do, this happens:
•
The LED associated with the registered staff level extinguishes.
•
The associated corridor light extinguishes.
•
Staff presence is no longer registered at the base master and on the video display
(if present).
ProCare 6000 Operation Manual 4-11
Registering Staff Presence