User guide

The dual patient station is normally mounted in the head wall between the patient beds.

It is pictured in Figure 4-2.

Note:

If your system has custom stations, the button descriptions in this manual may not

match your stations. For example, the CODE button on your station may read “code

blue.” Note these customizations in the manual’s margins.

The CODE Button

Press this button to send a code blue emergency call to the base master station. (Dual pa

tient stations will send two calls, one left bed and one right bed, when this button is

pressed.) This causes the following to happen:

•

The light on the CODE button illuminates to confirm call placement.

•

The patient station beeps eight times.

•

The associated corridor light illuminates and flashes at a designated rate (default is fast

flash amber).

•

The call appears on the base master display.

•

Tones sound at the base master and at stations where the system monitor function is

active.

4-2

ProCare 6000 Operation Manual

Single and Dual Patient Stations

CALL

AUX

CANCEL

STAFF

CODE

AUX

CALL

ALIGN CONNECTOR TAB

BED

Figure 4-2: Model 4A2486 Dual Patient Station