User guide

Changing Tone, Date, and Time Settings (MENU, 6)
Setting the Tone Level (MENU, 6, 1)
This function allows you to set the tone level (volume) for the base master.
Note:
The tone levels for on duty and off duty status are set independently. Place the base
master on duty to set on duty tone levels, then place the base master off duty to set
off duty tone levels. See Placing the Master On/Off Duty on page 3-3.
1. Press MENU.
2. Press 6 to select Settings = 6.
3. Press 1 to select Set Tone Level = 1. “Tone Level” and the current tone level setting
appear:
4. Press the VOL up or down arrows to increase or decrease the tone levels. The volume
level heard from the base master corresponds to the displayed setting.
5. Press *ANS when the desired tone level is set.
6. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
ProCare 6000 Operation Manual 3-27
Changing Tone, Date, and Time Settings (MENU, 6)
Tone Level = 06
Figure 3-29: Setting the Tone Level Display