User guide

Creating Pager Numbers (MENU, 5, 7)
This menu selection allows you to create new pager numbers.
Notes:
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no assignment functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MatchMaker ip software to create pager
numbers. See the MatchMaker ip Administrator Guide.
1. Press MENU.
2. Press 5 to select Pocket Page = 5.
3. Press 7 to select Create Pager# = 7. Figure 3-28 appears:
4. Enter the new pager number. If the number is shorter than the number of spaces in
the display, press *ANS. “Waiting for Data” appears briefly, then the base master
returns to Figure 3-28.
5. Repeat step 4 to create more pager numbers.
6. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
3-26 ProCare 6000 Operation Manual
Performing Pocket Page Functions (MENU, 5)
CreatePgr > _ _ _ _ _
Figure 3-28: Creating Pager Numbers