User guide

Paging Staff by Pager Number (MENU, 5, 4)
You can page staff members by their pager numbers.
Notes:
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no pocket paging functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MessageMaker ip software to page staff.
See the MessageMaker ip User Guide.
1. Press MENU.
2. Press 5 to select Pocket Page = 5.
3. Press 4 to select Page Pager ID# = 4. Figure 3-24 appears:
4. Enter the pager number. If the number is shorter than the number of spaces in the
display, press *ANS. Figure 3-25 appears:
5. Enter the message. It can be a combination of up to eight numbers (0 through 9), the
configured buttons on the key pad (letters or codes), or spaces. If the message is less
than eight characters, press *ANS.
a. “Waiting for Resp” (response) appears briefly.
b. The page is sent and the base master returns to the display state.
6. Repeat steps 1 through 6 to page additional staff.
ProCare 6000 Operation Manual 3-23
Performing Pocket Page Functions (MENU, 5)
Pager # - > _ _ _ _ _
Figure 3-24: Paging Staff by Pager Number
Msg -> _ _ _ _ _ _ _ _
Figure 3-25: Transmitting a Message to Staff by Pager Number