User guide

Performing an All Page (MENU, 4, 2)
You can page all stations in your local area group (LAG). You cannot page stations in
other LAGs.
Notes:
If a station calls your base master, and another base master pages that station before
you answer its call, the call will be suspended during the page, then automatically
reinstated as soon as the page ends.
A station cannot place a normal call while it is being paged. However, it can still
place lavatory emergency and code blue calls during the page.
Hallway paging speakers will be included in the LAG page if your system has been
configured for it.
1. Press MENU.
2. Press 4 to select Audio Page = 4.
3. Press 2 to select All (LAG) Page = 2.
4. Select one of the options listed below.
Note:
Regardless of the option selected, you cannot page more than 20 stations per zone
(ZIU card).
a. Press 1 (All Stations) to page all stations within the LAG.
b. Press 2 (Staff Only) to page all stations with any staff member registered.
c. Press 3 (RED Only) to page only those stations with red presence registered.
d. Press 4 (AMBER Only) to page only those stations with amber presence
registered.
e. Press 5 (GREEN Only) to page only those stations with green presence
registered.
Note:
Red, amber, and green presence correspond to the colored buttons on the
presence stations. These menu items use the words “red,” “amber,” and “green”
even if the staff levels have been given other names in your system.
5. Lift the handset when prompted by the base master display. (To cancel an audio
page, press #CNCL before lifting the handset.) The base master connects to the
stations and indicates the type of page you are making (e.g., Page All: Staff).
6. Speak into the handset to make your announcement.
7. When finished, replace the handset.
ProCare 6000 Operation Manual 3-17
Performing Audio Page Functions (MENU, 4)