User guide

5. Enter the new staff assignment. If the ID number is shorter than the number of digits
shown on the display, press *ANS.
a. “Waiting for Resp” (response) appears briefly.
b. The call reappears in the display followed by TALK.
6. Press #CNCL or replace the handset to end the call.
Sending a Pocket Page While Connected to a Call
Follow these steps to send a pocket page to a staff member while connected to a call.
Notes:
•
This is an optional feature. Your system may not be equipped for pocket paging.
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no pocket paging functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MessageMaker ip™ software to page staff.
See the MessageMaker ip User Guide.
•
You should be familiar with pocket paging before performing these functions.
See Performing Pocket Page Functions beginning on page 3-20.
2-8 ProCare 6000 Operation Manual
Sending a Pocket Page While Connected to a Call
nAsID#> _ _ _ _
Figure 2-10: New Alternate Staff Assignment