User guide

Answering a Call from Any Station
You can answer calls placed from any station covered by your Telco card, regardless of
whether or not you are assigned to the station:
1. Lift the telephone handset.
2. Enter the Telco extension number. (See the extensions on page 5-1.) A basic
telephone ring and a beep confirm that you have accessed the Telco. (If the Telco is
in use you will hear a busy signal.)
3. Enter a series of zeroes (the number of zeroes was configured at system installation).
For your reference, record the number of zeroes here: ______________________
You are connected to the highest priority unanswered call.
4. Talk to the person through the handset.
5. To end your telephone session, press the pound (#) key twice to disconnect from the
Telco. A brief warble tone confirms disconnection.
—CAUTION—
You must press the pound (#) key TWICE to disconnect from the Telco. If you do
not, the Telco will be unusable until it times out.
Note:
If your facility has the newer Telco card (Model 110-3628B) and a PBX that supports the
Call Party Disconnect feature, you do not need to press the pound (#) key twice. You can
simply hang up the phone.
ProCare 6000 Operation Manual 5-5
Answering a Call