User guide

Model 200-1272 Call Cord Assembly
This assembly provides nurse call capabilities to
one patient with one patient station. It has a
non-locking, momentary pushbutton switch.
Model 200-1272 is 12 feet (3.7 m) long.
Model 570-131 Dummy Plug
Removing a call cord, air cord, or other device
from the front panel receptacle on a patient station
automatically places a call from the station.
If you need to remove a device from a patient
station, remove it, insert a dummy plug, then press
the station’s CANCEL button.
Cord Assembly Care
The cord assemblies can be wiped down with a damp cloth, or with any disinfectant typi
-
cally used by hospital maintenance (e.g., Sidex, Staphine, or a 10% bleach/water
solution). DO NOT soak the cords.
4-30 ProCare 6000 Operation Manual
Cord Assembly Care
Figure 4-27: Call Cord Assembly
(Model 200-1272)
Figure 4-28: Dummy Plug
(Model 570-131)