User guide

Canceling a Priority or Reminder Call
Priority and reminder calls can only be canceled at the patient station associated with the
pillow speaker that placed the call.
Either press the CANCEL button on the patient station, or register staff presence in the
room. (The staff level must be the same as the reminder. If the call is on red reminder,
only the registration of red presence will cancel the call.) When you do, this happens:
•
The CALL LED on the patient station and the green LED on the pillow speaker extin
-
guish to confirm call cancellation.
•
The associated corridor light extinguishes.
•
The tone ceases at the base master.
•
The call disappears from the base master and the video display (if present).
•
The call disappears from stations where the system monitor function is active, or from
any staff/duty stations.
Pillow Speaker Care
To ensure proper operation of the pillow speaker, follow these precautions:
•
Use the provided bed clip to secure the pillow speaker to the patient’s bedding for
easy accessibility.
•
Use the provided cord clamp to secure the pillow speaker cord to itself. Do not wrap
the pillow speaker cord around the bed rail to get it out of the way.
•
Place the pillow speaker in the provided holder when not in use.
•
Do not pull on the pillow speaker to remove it from the patient station or to move the
bed. Doing so can damage the delicate electronic equipment inside the pillow speaker.
The pillow speakers can be wiped down with a damp cloth, or with any disinfectant typi
-
cally used by hospital maintenance (e.g., Sidex, Staphine, or a 10% bleach/water
solution). DO NOT soak the cords.
4-24 ProCare 6000 Operation Manual
Pillow Speaker Care