User guide

4 Connector
Depending on the pillow speaker model, this multi-pin connector either plugs into
the patient station or into a receptacle in the wall near the floor.
5 TV Button
Press this button to control television functions. Depending on your system
configuration, it will either turn the TV on/off and step through the channels, or it
will only turn the TV on/off. In this case, press the up and down arrow buttons to
change channels.
6 Up/Down Arrow Buttons
Depending on your system configuration, pressing these buttons may change tele
-
vision stations or control lights, or they may have other assigned functions.
7 “i” Button OR Auxiliary Button
On the “smart” pillow speakers, this is an internationally recognized “i” button
that controls the TV closed-caption function and turns the function on and off.
On other pillow speakers, the function of this button is determined by your sys-
tem’s configuration. If it is not labeled on the pillow speaker, it is not functional.
8 Ancillary Button
Depending on the pillow speaker and your system’s configuration, this button may
be labeled with a light bulb to indicate that it will control low voltage lighting in
the room. Alternately, it may be labeled with a musical note to indicate that it will
turn the radio on and off, and change radio stations.
ProCare 6000 Operation Manual 4-21
Pillow Speaker Buttons and Functions