Specifications

The special purpose dual patient station is used with a bed safety rail communication system.
A pillow speaker can be substituted for the bed communication system. The patient can
place a call to the master station through the bed rail system. Calls from this station are indi-
cated at the master station, the duty stations, and the corresponding corridor and zone lights.
A call is canceled by pressing the CANCEL touchpad at the patient station, or by answering
the call at the master station and communicating with the patient through the bed communi-
cations panel.
Removal of the bed communications cord sets off an emergency call at the master
station. The call is canceled by replacing the bed communications cord, pillow speaker,
or dummy plug (supplied by the bed manufacturer) and pressing CANCEL touchpad.
When the cord is unplugged, two-way communication reverts to the station’s
speaker/microphone.
1
Speaker/Microphone
The speaker/microphone allows communication between a person in the room and
a master station attendant when the bed rail communications system is unplugged.
Hands-free operation provides communication through the station panel.
2
Amber Call Assurance LED
The amber LED lights when a call is placed from this station. It stays lit until
the call is answered from the master station or canceled at the patient station.
Call priority is indicated by a steady illumination of this LED for normal calls,
rapid flashing for emergency calls, or flashes slowly if set on reminder.
3
CANCEL Touchpad
Press to cancel any pending call placed from this station or to remove the sta-
tion from reminder status.
4
Red Privacy LED
This red privacy LED lights when this station is in the intercommunication
mode or when it is being monitored by a master station.
32 ProCare 2000 Operation Manual
Special Purpose
Dual Patient
Station
Model
4A3188
2
4
1
3
2